Teryx Oil and Filter Change - Kawasaki Teryx Forums: Kawasaki UTV Teryx Forum

Teryx Oil and Filter Change

Published by cepennington
06-24-2008

Teryx Oil and Filter Change

Click on the attached PDF Document. This document can be opened using Adobe Reader, and can be saved or printed.

Below are a list of oil filters that should fit the Teryx. I tried the longer (3.1/4") Filters, but they would not fit due to clearance of the radiator hose. So I only listed the 2.5" long filters.

Each of these oil filters have 20 x 1.5mm threads, 14psi by-pass valve, anti –drain back valve, 2.3” O.D. gasket, and are approximately 2.5” long. I have not personally tried each of these filters, so this is for information only. Each filter should be compared to the factory filter prior to installation.

Motor Cycle Filters
1. Kawasaki 16097-0003
2. Honda 15410-MCJ-000
3. AC Delco PF2135
4. AMSOIL SMF103
5. CARQUEST 85358
6. FRAM PH6017a
7. K&N KN-204
8. NAPA Gold 1358
9. Purolator ML16817
10. STP SMO-17
11. WIX 51358

Automotive Filters

1. AC Delco PF1237
2. Baldwin B1400
3. Bosch 3300
4. Firestone TF2876
5. Hastings LF113
6. Mobil M1-108
7. NAPA Gold 1365
8. Purolator L14612
9. Purolator Pure One PL14612
10. STP S-02876
11. Wal-Mart SuperTech ST6607
12. WIX 51365

Tutorial Tools

Show Printable Version

Email this Page

Attached Files

Teryx Oil and Filter Change.pdf (249.1 KB, 616 views)

By BSIDE on 09-26-2008, 10:48 AM

Oil and oil filter

Which oil filter would you recommend and type of oil?

Remove Advertisements Sponsored Links
TeryxHQ.com Advertisement

By AXO on 02-20-2009, 09:31 PM

Quote:

Originally Posted by BSIDE

Which oil filter would you recommend and type of oil?

I alway like K&N because they weld a nut to the top of the filter which makes filter removal a breeze!

By Mikeomo on 03-31-2009, 12:44 PM

I use mobile one oil & filter...

The best way I found to get the old filter out (for those with large hands) is to jam a screwdriver through the side of the old filter and use that to rotate the filter around.

By somekevinguy on 03-31-2009, 03:07 PM

Has anyone tried a filter wrench?

By Mikeomo on 04-01-2009, 12:13 PM

I don't have one small enough...

And besides, I have plenty of screwdrivers lying around, would have to spend some $$$ for another filter wrench!

By 1Txn on 04-02-2009, 06:07 PM

The oil is measured with the cap screwed down or just resting on the opening? I ask because the Artic Cat is measured at the resting level - not screwed down. Their rear diff oil level is measured with a 8" zip tie bent at the part where the tie starts to zip, yep just past the pointed part at about the 1" mark, per their shop manual.

By g-force on 07-29-2010, 03:33 PM

That should say 2.3 liters, about 2.4 qts.