Aluminum Skids! - TeryxHQ.com Forums

Trail Logic · 05-25-2008, 01:54 PM

Trail Logic has these great oversized 5052 aluminum replacements for the crappy plastic skids in stock and ready to ship! They are 3/16" material and re-use your stock hardware, and easy bolt on that will protect your expensive differentials from certain trail damage.

$105, with free shipping here on the forum!

E-mail capt@vzw.blackberry.net if you would like a set.

Chris

dieselpowered · 06-03-2008, 02:02 AM

So now are these a full skid or just the front and rear?

They look good.

Trail Logic · 06-03-2008, 07:49 AM

They are oversized front and rear skids. We will be developing a modular system that will work with these and cover the entire bottom. Thanks for asking!

Since were on the subject, What is everyones thougts on all the cooling vents under the Teryx. I personally think the forward facing vents in the stockers are just big dirt/debris scoops that are asking for trouble. There has to be a balance between air flow and protection.

Chris

travdude · 06-03-2008, 04:47 PM

I think the vents are good for when you wash all the mud and dirt off, otherwise it would collect in between the floor and skid plate.

redle · 10-24-2008, 08:15 PM

does anyone make a good skid plate that comes up the sides to keep the trim plastic from getting beat up so fast?

dieselpowered · 10-28-2008, 08:40 PM

Quote:

Originally Posted by redle

does anyone make a good skid plate that comes up the sides to keep the trim plastic from getting beat up so fast?

I am not thinking so my friend...most just cover the under carriage.

Magellan · 10-30-2008, 02:28 AM

Quote:

Originally Posted by redle

does anyone make a good skid plate that comes up the sides to keep the trim plastic from getting beat up so fast?

FST makes some Rock slider nerfs but we had to modify them to not stick out so far as we don't run LT.

redle · 11-16-2008, 11:50 PM

ya gotta have some kind of vent- i used a full piece of uhmw on mine with no vent holes cut in and if it idles for more than about 5 minutes it overheats and boils over

06-03-2008, 02:02 AM	#2 (permalink)
dieselpowered www.TeryxHQ.com Join Date: Feb 2008 Location: Peoria, AZ Posts: 1,967	So now are these a full skid or just the front and rear? They look good. __________________ www.RhinoTalk.net www.TeryxHQ.com 2008 Kawasaki Teryx \| 840cc BBK w/ stage III cams \| FST long travel and HD steering \| Twisted Stitch seats \| MSHQ cage \| Muzzys dual exhaust \| Dynatek CDI \| aFe intake \| HiPer carbon fiber beadlocks \| Goodyear MT/Rs \| Crow restraints \| Livewire LED whip \| NightOwl HID conversion \| 40" Edge Series LED lightbar \| Fuego Dual HID Lights \| Dalton clutch kit \| Full audio \| Navigation \| Lightened and machined clutch \| Power Steering \| TrailTech Vapor Computer \| More to come...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DG Bumpers and Skids	mouser58	Kawasaki Teryx Exterior Discussions	3	03-20-2008 05:02 PM

06-03-2008, 07:49 AM	#3 (permalink)
Trail Logic TeryxHQ.com Site Sponsor Join Date: May 2008 Posts: 23	They are oversized front and rear skids. We will be developing a modular system that will work with these and cover the entire bottom. Thanks for asking! Since were on the subject, What is everyones thougts on all the cooling vents under the Teryx. I personally think the forward facing vents in the stockers are just big dirt/debris scoops that are asking for trouble. There has to be a balance between air flow and protection. Chris

06-03-2008, 04:47 PM	#4 (permalink)
travdude Senior Member Join Date: Apr 2008 Location: Long Beach, CA Posts: 114	I think the vents are good for when you wash all the mud and dirt off, otherwise it would collect in between the floor and skid plate.

10-24-2008, 08:15 PM	#5 (permalink)
redle Junior Member Join Date: Oct 2008 Location: wa Posts: 16	does anyone make a good skid plate that comes up the sides to keep the trim plastic from getting beat up so fast?

11-16-2008, 11:50 PM	#8 (permalink)
redle Junior Member Join Date: Oct 2008 Location: wa Posts: 16	ya gotta have some kind of vent- i used a full piece of uhmw on mine with no vent holes cut in and if it idles for more than about 5 minutes it overheats and boils over