Bed Rails - TeryxHQ.com Forums

Lobo · 08-29-2008, 07:55 AM

Built some bed rails for my Teryx. They are stout and it would be nice if I had a tube bender, but since I don't, I went ahead and used 3/4 pipe since I had some in the shop. In the next day or so I will clean up the welds and finish them.

dieselpowered · 08-29-2008, 11:09 AM

Great job...they look nice!

Lobo · 08-29-2008, 12:21 PM

Thank you.

It was fun getting creative in the shop

Lobo · 08-29-2008, 08:11 PM

Well, they are textured and bolted into place.

Magellan · 08-30-2008, 08:18 AM

Very nice, I like how solidly they look to attach better than any others I have seen.

Any chance of you selling a set?

Lobo · 08-30-2008, 09:44 AM

Thanks. They do sit flat. I had notched the base to where the orginal fender mounting machine screws stay in place. They are stout and if anything is dropped onto them the force is spread out over a wider area lessening potential damage. I had not given any consideration to selling any though.

Thunderhawk · 08-30-2008, 10:35 AM

Those look nice. Garage projects are always fun. I wish I had more time to tinker-around.

For anyone who does not have the time or equipment to build their own bed rails, Thunderhawk offers bed rails for $99. Ours are longer in the rear, for a bit more protection.

Thunderhawk will also be giving away a set of our bed rails in an upcoming contest here at TeryxHQ. If anyone buys bed rails before the contest, and then wins the contest, we'll give you credit towards anything else that we handle.

Harry

Magellan · 08-30-2008, 12:15 PM

They are nice Lobo.

Thanks for the info Thunderhawk, I just ordered a set from you. Thank you.

dieselpowered · 08-30-2008, 12:23 PM

I think you did an excellent job on them Lobo, I wish I had the equipment and skills to be able to make my own stuff, well done my friend!

Thunderhawk, appreciate your support of the members!

ram04 · 08-30-2008, 05:37 PM

Those look great, how did you attach them exactly? I've got a old style of aluminum bed rails for a truck, that I have looked at a couple times, but am not real sure how I would attach them.

08-29-2008, 07:55 AM	#1 (permalink)
Lobo Member Join Date: Aug 2008 Posts: 30	Bed Rails Built some bed rails for my Teryx. They are stout and it would be nice if I had a tube bender, but since I don't, I went ahead and used 3/4 pipe since I had some in the shop. In the next day or so I will clean up the welds and finish them.

08-29-2008, 11:09 AM	#2 (permalink)
dieselpowered www.TeryxHQ.com Join Date: Feb 2008 Location: Peoria, AZ Posts: 2,040	Great job...they look nice! __________________ www.RhinoTalk.net www.TeryxHQ.com 2008 Kawasaki Teryx \| 840cc BBK w/ stage III cams \| FST long travel and HD steering \| Twisted Stitch seats \| MSHQ cage \| Muzzys dual exhaust \| Dynatek CDI \| aFe intake \| HiPer carbon fiber beadlocks \| Goodyear MT/Rs \| Crow restraints \| Livewire LED whip \| NightOwl HID conversion \| 40" Edge Series LED lightbar \| Fuego Dual HID Lights \| Dalton clutch kit \| Full audio \| Navigation \| Lightened and machined clutch \| Power Steering \| TrailTech Vapor Computer \| More to come...

08-30-2008, 12:23 PM	#9 (permalink)
dieselpowered www.TeryxHQ.com Join Date: Feb 2008 Location: Peoria, AZ Posts: 2,040	I think you did an excellent job on them Lobo, I wish I had the equipment and skills to be able to make my own stuff, well done my friend! Thunderhawk, appreciate your support of the members! __________________ www.RhinoTalk.net www.TeryxHQ.com 2008 Kawasaki Teryx \| 840cc BBK w/ stage III cams \| FST long travel and HD steering \| Twisted Stitch seats \| MSHQ cage \| Muzzys dual exhaust \| Dynatek CDI \| aFe intake \| HiPer carbon fiber beadlocks \| Goodyear MT/Rs \| Crow restraints \| Livewire LED whip \| NightOwl HID conversion \| 40" Edge Series LED lightbar \| Fuego Dual HID Lights \| Dalton clutch kit \| Full audio \| Navigation \| Lightened and machined clutch \| Power Steering \| TrailTech Vapor Computer \| More to come...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-29-2008, 12:21 PM	#3 (permalink)
Lobo Member Join Date: Aug 2008 Posts: 30	Thank you. It was fun getting creative in the shop

08-29-2008, 08:11 PM	#4 (permalink)
Lobo Member Join Date: Aug 2008 Posts: 30	Well, they are textured and bolted into place.

08-30-2008, 08:18 AM	#5 (permalink)
Magellan Senior Member Join Date: Jun 2008 Location: Western, NC Posts: 367	Very nice, I like how solidly they look to attach better than any others I have seen. Any chance of you selling a set?

08-30-2008, 09:44 AM	#6 (permalink)
Lobo Member Join Date: Aug 2008 Posts: 30	Thanks. They do sit flat. I had notched the base to where the orginal fender mounting machine screws stay in place. They are stout and if anything is dropped onto them the force is spread out over a wider area lessening potential damage. I had not given any consideration to selling any though.

08-30-2008, 10:35 AM	#7 (permalink)
Thunderhawk TeryxHQ.com Site Sponsor Join Date: Mar 2008 Location: Cleveland, OH Posts: 40	Those look nice. Garage projects are always fun. I wish I had more time to tinker-around. For anyone who does not have the time or equipment to build their own bed rails, Thunderhawk offers bed rails for $99. Ours are longer in the rear, for a bit more protection. Thunderhawk will also be giving away a set of our bed rails in an upcoming contest here at TeryxHQ. If anyone buys bed rails before the contest, and then wins the contest, we'll give you credit towards anything else that we handle. Harry

08-30-2008, 12:15 PM	#8 (permalink)
Magellan Senior Member Join Date: Jun 2008 Location: Western, NC Posts: 367	They are nice Lobo. Thanks for the info Thunderhawk, I just ordered a set from you. Thank you.

08-30-2008, 05:37 PM	#10 (permalink)
ram04 Senior Member Join Date: Jul 2008 Location: Southern Indiana Posts: 129	Those look great, how did you attach them exactly? I've got a old style of aluminum bed rails for a truck, that I have looked at a couple times, but am not real sure how I would attach them.