Single Tube Doors - TeryxHQ.com Forums

dieselpowered · 04-04-2008, 11:05 AM

I am considering the installation of some single tube doors, however, not sure if anyone is making anything.

Any thoughts?

Custom Creations · 04-09-2008, 10:13 PM

we make a bar that we weld right to our cage as an added protector, I will post a picture someday... soon! it is not a door though just another bar in the cage.

dieselpowered · 04-09-2008, 10:18 PM

That is kinda what I am thinking, however, being that I have a cage on already, do you offer anything bolt on?

NEVERENOUGH · 04-10-2008, 07:37 AM

Do you think with aftermarket seats that a tube door that doesn't open will be a pain or not. I am thinking more a 1/4 door will make getting in and out easier not sure though.

dieselpowered · 04-10-2008, 08:56 AM

What I was actually invisioning was the single tube would run alongside the seat and then sweep downward and big and then sweep again and head over to the frame.

Quite possibly that made no sense...let me see if I can do something in autoCAD and then show you.

Thunderhawk · 05-02-2008, 08:10 PM

We'll have a bolt-on door bar available shortly. I'll keep you posted.

Thanks,
Harry

www.thunderhawkperformance.com

04-04-2008, 11:05 AM	#1 (permalink)
dieselpowered www.TeryxHQ.com Join Date: Feb 2008 Location: Peoria, AZ Posts: 1,991	Single Tube Doors I am considering the installation of some single tube doors, however, not sure if anyone is making anything. Any thoughts? __________________ www.RhinoTalk.net www.TeryxHQ.com 2008 Kawasaki Teryx \| 840cc BBK w/ stage III cams \| FST long travel and HD steering \| Twisted Stitch seats \| MSHQ cage \| Muzzys dual exhaust \| Dynatek CDI \| aFe intake \| HiPer carbon fiber beadlocks \| Goodyear MT/Rs \| Crow restraints \| Livewire LED whip \| NightOwl HID conversion \| 40" Edge Series LED lightbar \| Fuego Dual HID Lights \| Dalton clutch kit \| Full audio \| Navigation \| Lightened and machined clutch \| Power Steering \| TrailTech Vapor Computer \| More to come...

04-09-2008, 10:18 PM	#3 (permalink)
dieselpowered www.TeryxHQ.com Join Date: Feb 2008 Location: Peoria, AZ Posts: 1,991	That is kinda what I am thinking, however, being that I have a cage on already, do you offer anything bolt on? __________________ www.RhinoTalk.net www.TeryxHQ.com 2008 Kawasaki Teryx \| 840cc BBK w/ stage III cams \| FST long travel and HD steering \| Twisted Stitch seats \| MSHQ cage \| Muzzys dual exhaust \| Dynatek CDI \| aFe intake \| HiPer carbon fiber beadlocks \| Goodyear MT/Rs \| Crow restraints \| Livewire LED whip \| NightOwl HID conversion \| 40" Edge Series LED lightbar \| Fuego Dual HID Lights \| Dalton clutch kit \| Full audio \| Navigation \| Lightened and machined clutch \| Power Steering \| TrailTech Vapor Computer \| More to come...

04-10-2008, 07:37 AM	#4 (permalink)
NEVERENOUGH Senior Member Join Date: Mar 2008 Location: Chino Valley Az Posts: 578	Do you think with aftermarket seats that a tube door that doesn't open will be a pain or not. I am thinking more a 1/4 door will make getting in and out easier not sure though. __________________ Too much is neverenough 2003 duramax dually for towing 2004 Gearvbox toyhauler 2006 limited yfz 450 mine 2003 Pred 500 wifes 1986 4trax 250R sons 1997 300ex daughter 2006 250ex daughter 2008 Teryx ours

04-10-2008, 08:56 AM	#5 (permalink)
dieselpowered www.TeryxHQ.com Join Date: Feb 2008 Location: Peoria, AZ Posts: 1,991	What I was actually invisioning was the single tube would run alongside the seat and then sweep downward and big and then sweep again and head over to the frame. Quite possibly that made no sense...let me see if I can do something in autoCAD and then show you. __________________ www.RhinoTalk.net www.TeryxHQ.com 2008 Kawasaki Teryx \| 840cc BBK w/ stage III cams \| FST long travel and HD steering \| Twisted Stitch seats \| MSHQ cage \| Muzzys dual exhaust \| Dynatek CDI \| aFe intake \| HiPer carbon fiber beadlocks \| Goodyear MT/Rs \| Crow restraints \| Livewire LED whip \| NightOwl HID conversion \| 40" Edge Series LED lightbar \| Fuego Dual HID Lights \| Dalton clutch kit \| Full audio \| Navigation \| Lightened and machined clutch \| Power Steering \| TrailTech Vapor Computer \| More to come...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-09-2008, 10:13 PM	#2 (permalink)
Custom Creations Member Join Date: Feb 2008 Location: Highland, CA Posts: 60	we make a bar that we weld right to our cage as an added protector, I will post a picture someday... soon! it is not a door though just another bar in the cage.

05-02-2008, 08:10 PM	#6 (permalink)
Thunderhawk TeryxHQ.com Site Sponsor Join Date: Mar 2008 Location: Cleveland, OH Posts: 36	We'll have a bolt-on door bar available shortly. I'll keep you posted. Thanks, Harry www.thunderhawkperformance.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rubber Tube On Cage	dieselpowered	Kawasaki Teryx General Discussions	7	07-09-2008 05:54 AM