FST Teryx qualifies 1st @ CORR - TeryxHQ.com Forums

Mr. Off-Road · 08-15-2008, 08:33 PM

Just got word that Dan Kelly in the FST CORR Teryx qualified in 1st place @ CORR in Pomona... I have been trying to track down qualification results online but I cant find any to see where the rest of the field is at.

dieselpowered · 08-15-2008, 08:35 PM

Congrats to Dan, that is excellent news!

Four Stroke Tech · 08-16-2008, 07:08 PM

Chad won again in his Funco Muzzy build, Dan dropped out on the firt lap.

Dynoray · 08-19-2008, 10:28 AM

Quote:

Originally Posted by Four Stroke Tech

Chad won again in his Funco Muzzy build, Dan dropped out on the firt lap.

Yes, Dan broke an axle on the first lap.
They finally had everything, well almost everything, stay together on Sunday. Started 8th with the invert and drove right to the front down the first straight, had a 2 sec lead first lap, 4 sec second lap, 4.5 sec third lap and backed it down (caution comes out at lap 5) during the caution he was blacked flaged for a lose bumper, had to pit and remove it. He restarted about 20th with 3 laps to go, was 16th going by the start finish line, 7th next lap and 4th the next and final lap.
I can't wait for the next race, once they have a little time to test it should be good.
again I would like to thank Dan Kelly, FST Motorsports (Frame and Suspension Technologies) and all the people working on Dans car for making our motors look so good.
Ray

Mr. Off-Road · 08-20-2008, 12:44 PM

Quote:

Originally Posted by dynoray

... I would like to thank ... Fst motorsports (frame and suspension technologies) ...

correction, this is what it stands for...

fabrication suspension technology

Dynoray · 08-20-2008, 01:34 PM

Quote:

Originally Posted by Mr. Off-Road

correction, this is what it stands for...

fabrication suspension technology

Thank you for correcting me Mr. Off-Road and sorry to Torry.
I guess it's a good thing we're better with motors then names, LOL
Ray

Dale_Jr_88 · 08-22-2008, 10:06 PM

Does anyone make Heavy Duty Race Axles for the Teyrex Yet??? I'm sure they do , but they must not be strong enough, seems to be a lot of them snapping !!!

s2k1 · 08-23-2008, 02:37 PM

Quote:

Originally Posted by Dale_Jr_88

Does anyone make Heavy Duty Race Axles for the Teyrex Yet??? I'm sure they do , but they must not be strong enough, seems to be a lot of them snapping !!!

It broke the outer stub axle, the part that is one piece with the outer CV joint. The axle shafts are what people break in the Rhino, different part.
And yes, Summers Brothers Racing, and Gorilla Axle make Teryx axles.

Dale_Jr_88 · 08-25-2008, 09:18 PM

Thankyou !!!

08-15-2008, 08:33 PM	#1 (permalink)
Mr. Off-Road Junior Member Join Date: May 2008 Location: Surprise, Arizona USA Posts: 10	FST Teryx qualifies 1st @ CORR Just got word that Dan Kelly in the FST CORR Teryx qualified in 1st place @ CORR in Pomona... I have been trying to track down qualification results online but I cant find any to see where the rest of the field is at.

08-15-2008, 08:35 PM	#2 (permalink)
dieselpowered www.TeryxHQ.com Join Date: Feb 2008 Location: Peoria, AZ Posts: 2,035	Congrats to Dan, that is excellent news! __________________ www.RhinoTalk.net www.TeryxHQ.com 2008 Kawasaki Teryx \| 840cc BBK w/ stage III cams \| FST long travel and HD steering \| Twisted Stitch seats \| MSHQ cage \| Muzzys dual exhaust \| Dynatek CDI \| aFe intake \| HiPer carbon fiber beadlocks \| Goodyear MT/Rs \| Crow restraints \| Livewire LED whip \| NightOwl HID conversion \| 40" Edge Series LED lightbar \| Fuego Dual HID Lights \| Dalton clutch kit \| Full audio \| Navigation \| Lightened and machined clutch \| Power Steering \| TrailTech Vapor Computer \| More to come...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FST CORR Update	Unleashed UTV	Unleashed UTV	6	08-03-2008 12:29 PM
CORR Chula Vista 7/26 results	s2k1	UTV Short Track Racing	1	07-27-2008 11:38 PM

08-16-2008, 07:08 PM	#3 (permalink)
Four Stroke Tech Build Sponsor Join Date: May 2008 Posts: 96	Chad won again in his Funco Muzzy build, Dan dropped out on the firt lap.

08-22-2008, 10:06 PM	#7 (permalink)
Dale_Jr_88 Junior Member Join Date: Aug 2008 Posts: 8	Does anyone make Heavy Duty Race Axles for the Teyrex Yet??? I'm sure they do , but they must not be strong enough, seems to be a lot of them snapping !!!

08-25-2008, 09:18 PM	#9 (permalink)
Dale_Jr_88 Junior Member Join Date: Aug 2008 Posts: 8	Thankyou !!!