Crow Enterprizes - TeryxHQ.com Forums

dieselpowered · 05-12-2008, 04:18 PM

Just thought I would give some props to Crow Enterprizes. On our very first time out, someone (will not mention anyone specific) left the "Y' harness hanging over the rear seat. When I returned home, I found that the sewn in pads had been burned by the exhaust. Long story short, I sent the "Y" portion of the harness back to Crow Enterprizes for repair. Not only did they simply replace the "Y" portion of the belt and the pads, however, they turned them around back to me the same day.

Great service from Crow Enterprizes!

NEVERENOUGH · 05-12-2008, 04:39 PM

That is good to know. That is the harnesses we will be ordering for our Teryx. I always knew the quality was good glad to know the service is also.

dieselpowered · 05-12-2008, 07:51 PM

Their quality and support is excellent!

John@UTVCRAP · 05-18-2008, 11:03 AM

Im with you on this one Crow is a great harness thats all we sell at the shop these days

05-12-2008, 04:18 PM	#1 (permalink)
dieselpowered www.TeryxHQ.com Join Date: Feb 2008 Location: Peoria, AZ Posts: 2,035	Crow Enterprizes Just thought I would give some props to Crow Enterprizes. On our very first time out, someone (will not mention anyone specific) left the "Y' harness hanging over the rear seat. When I returned home, I found that the sewn in pads had been burned by the exhaust. Long story short, I sent the "Y" portion of the harness back to Crow Enterprizes for repair. Not only did they simply replace the "Y" portion of the belt and the pads, however, they turned them around back to me the same day. Great service from Crow Enterprizes! __________________ www.RhinoTalk.net www.TeryxHQ.com 2008 Kawasaki Teryx \| 840cc BBK w/ stage III cams \| FST long travel and HD steering \| Twisted Stitch seats \| MSHQ cage \| Muzzys dual exhaust \| Dynatek CDI \| aFe intake \| HiPer carbon fiber beadlocks \| Goodyear MT/Rs \| Crow restraints \| Livewire LED whip \| NightOwl HID conversion \| 40" Edge Series LED lightbar \| Fuego Dual HID Lights \| Dalton clutch kit \| Full audio \| Navigation \| Lightened and machined clutch \| Power Steering \| TrailTech Vapor Computer \| More to come...

05-12-2008, 04:39 PM	#2 (permalink)
NEVERENOUGH Senior Member Join Date: Mar 2008 Location: Chino Valley Az Posts: 586	That is good to know. That is the harnesses we will be ordering for our Teryx. I always knew the quality was good glad to know the service is also. __________________ Too much is neverenough 2003 duramax dually for towing 2004 Gearvbox toyhauler 2006 limited yfz 450 mine 2003 Pred 500 wifes 1986 4trax 250R sons 1997 300ex daughter 2006 250ex daughter 2008 Teryx ours

05-12-2008, 07:51 PM	#3 (permalink)
dieselpowered www.TeryxHQ.com Join Date: Feb 2008 Location: Peoria, AZ Posts: 2,035	Their quality and support is excellent! __________________ www.RhinoTalk.net www.TeryxHQ.com 2008 Kawasaki Teryx \| 840cc BBK w/ stage III cams \| FST long travel and HD steering \| Twisted Stitch seats \| MSHQ cage \| Muzzys dual exhaust \| Dynatek CDI \| aFe intake \| HiPer carbon fiber beadlocks \| Goodyear MT/Rs \| Crow restraints \| Livewire LED whip \| NightOwl HID conversion \| 40" Edge Series LED lightbar \| Fuego Dual HID Lights \| Dalton clutch kit \| Full audio \| Navigation \| Lightened and machined clutch \| Power Steering \| TrailTech Vapor Computer \| More to come...

05-18-2008, 11:03 AM	#4 (permalink)
John@UTVCRAP Member Join Date: May 2008 Location: Gilbert Az Posts: 48	Im with you on this one Crow is a great harness thats all we sell at the shop these days __________________ UTVCRAP.com is Located at 4244 West Dunlap Avenue Phoenix Arizona 85051 Email Sales@Utvcrap.com Phone 623-934-3070

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode