some install ?'s - Kawasaki Teryx Forums: Kawasaki UTV Teryx Forum
Kawasaki Teryx Electrical Discussions Kawasaki Teryx electrical discussions.
Lighting, audio, GPS, communications, etc.

User Tag List

LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 04-24-2010, 07:01 PM Thread Starter
Senior Member
Join Date: Apr 2010
Posts: 318
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
some install ?'s

I'm looking to mount some interior lights, reverse light, and a radio in my Rex and I wanna mount the toggle switches in dash and radio in glove box and was wondering what all I need to remove to mount switches. Does hood gotta come off to get behind dash? and also where everyone is routing their wire, tunnel? Reason I'm asking is work has me out of town so I can't even look at my Rex (but I can eBay) and I will only be home for couple days before I'm on road again and I wanna have good plan of attack so I can spend as lil time working on Rex and most time riding it as possible on my precious time off, thanks in advance
eez is offline  
Sponsored Links
post #2 of 3 (permalink) Old 04-25-2010, 07:32 AM
Senior Member
Join Date: May 2008
Posts: 3,999
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
You can remove screws from hood then slide it up the cage and hold it up with a broom handle or something.

You will most likely need to remove the plastic center hump to aid in running wires to battery area

Hunterworks is offline  
post #3 of 3 (permalink) Old 04-25-2010, 05:22 PM
Senior Member
IndyTeryx's Avatar
Join Date: Sep 2009
Location: Indy
Posts: 109
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
You can also follow the factory wiring route. It runs down the driver side fender and along the plastic down low on the side, back towards the battery. Hard to describe, but once you have the hood off you will be able to see it. Just loosen some of the plastic trim and you should be able to thread it through with out removing all the trim.

I actually just did this - ran my winch power wires, and 3 10ga wires for aux circuits and switches that I mounted in the dash.

'09 Teryx - BH 2.0's, ITP SS 212, Fox 2.0's, MuzzyPRO's, MSD, Warn XT40, SDR Bumpers, Power Steering
'08 Brute Force - BH's, ITP Sport Locks, K&N, Warn XT30, HMF Pipe and Optimizer
IndyTeryx is offline  
Sponsored Links


Quick Reply

Register Now

In order to be able to post messages on the Kawasaki Teryx Forums: Kawasaki UTV Teryx Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
Machined O.D. Cap install fireguy266 Kawasaki Teryx General Discussions 1 03-14-2010 06:59 PM
Rugged Install az_amsoil Kawasaki Teryx Electrical Discussions 0 05-24-2009 08:23 PM
FST std bore kit install BRET901 Kawasaki Teryx Performance Discussions 11 03-22-2009 07:52 AM
Our Newest Install SXSCustoms Kawasaki Teryx Electrical Discussions 8 12-06-2008 10:27 PM
Dynatek CDI Install Magellan Kawasaki Teryx Performance Discussions 3 06-30-2008 10:29 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89