quick seat question - Kawasaki Teryx Forums: Kawasaki UTV Teryx Forum
Kawasaki Teryx General Discussions General discussions pertaining to the Kawasaki Teryx.
Maintenance, cleaning, etc.

User Tag List

 
LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 08-02-2010, 10:03 AM Thread Starter
Senior Member
 
Join Date: Jan 2009
Location: Long Beach, Ca
Posts: 158
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
quick seat question

I just put some doors on and I noticed that the stock grab bar on the outside of the seat is rubbing the inside of the door. I went to remove the bar and it looks like I have to pull the seat from the base. I went to unbolt the base at the 4 bolts underneath and as soon as I turned it, it let off a pretty big cracking sound. I stoped because I dont know how those things are held in and dont want to break the plastic on the bottom. Plus I thought it was weird that the bolts were painted green. Is this normally a pain in the butt.
efajeep is offline  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 08-02-2010, 01:32 PM
Senior Member
 
bigdaddy's Avatar
 
Join Date: Sep 2009
Location: Farmerville Louisianna
Posts: 1,434
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
My stock seats when I tryed to remove the pans the nuts up in the pan turn I think out of 8 bolts only 3 of them would come out, I was able to get my latches off that was all I needed because I bought new lowering pans and seats but I guess I will have to cut the other bolts to remove the stock pans , seems like a poor design I was wondering if anybody else was having this problem.

Big Daddy
bigdaddy is offline  
post #3 of 4 (permalink) Old 08-02-2010, 01:40 PM
Build Sponsor
 
Unleashed UTV's Avatar
 
Join Date: May 2008
Posts: 430
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
Quote:
Originally Posted by efajeep View Post
I just put some doors on and I noticed that the stock grab bar on the outside of the seat is rubbing the inside of the door. I went to remove the bar and it looks like I have to pull the seat from the base. I went to unbolt the base at the 4 bolts underneath and as soon as I turned it, it let off a pretty big cracking sound. I stoped because I dont know how those things are held in and dont want to break the plastic on the bottom. Plus I thought it was weird that the bolts were painted green. Is this normally a pain in the butt.
Quote:
Originally Posted by bigdaddy View Post
My stock seats when I tryed to remove the pans the nuts up in the pan turn I think out of 8 bolts only 3 of them would come out, I was able to get my latches off that was all I needed because I bought new lowering pans and seats but I guess I will have to cut the other bolts to remove the stock pans , seems like a poor design I was wondering if anybody else was having this problem.
Some times the nut in the seat spins with the bolt. A highspeed 3/8's impact sometimes gets them out of there.

Unleashed UTV
5838 N. 19th Ave
Phoenix, AZ 85015
www.unleashedutv.com
Unleashed UTV is offline  
 
post #4 of 4 (permalink) Old 08-02-2010, 02:04 PM Thread Starter
Senior Member
 
Join Date: Jan 2009
Location: Long Beach, Ca
Posts: 158
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
Well I guess I will leave them in there untill I get new seats. I guess I better start getting some prices on the T/S Vortex's
efajeep is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Kawasaki Teryx Forums: Kawasaki UTV Teryx Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Quick tire question AXO Kawasaki Teryx General Discussions 5 10-10-2009 11:25 AM
Who makes a good quick release rear seat mount that works with PRP Bench? Magellan Kawasaki Teryx General Discussions 1 02-03-2009 04:25 PM
a question about seat bases CanadianViking Kawasaki Teryx Safety Discussions 4 12-14-2008 09:16 PM
question on int/bed seat area stonehengechimp Kawasaki Teryx General Discussions 3 09-10-2008 01:22 PM
One last seat question...... nobodysguess Kawasaki Teryx General Discussions 2 07-12-2008 03:57 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome
 


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89