Teryx HQ banner

how to set up dalton clutch kit for the most top end speed?

4K views 6 replies 5 participants last post by  Hunterworks 
#1 ·
I need top end speed so how do i set up the dalton clutch kit? thanks. it is a 2010 with dynatek cdi and dynatek coils, overdrive plate and air box mod.
 
#2 ·
Does the Dynatek remove or raise the speed and rev limiter, like the MSD.
The Dalton kit is not really going to gain any top end speed, what kind of top speed are you running now, a 100% stock machine with the MSD ignition should run 61-64 mph with a 100% stock clutch
 
#3 · (Edited)
OD plate gives you 4 mph.

The clutch kit itself wil only tune the clutching phase (shift).The kit can help bring back some hp lost from larger tires and weight increases to the car

On daltons website he has the manual on how much weight to run and what spring s to install .hope this helps

http://www.daltonindustries.com/downloads/TERYX-1.pdf
 
#6 ·
As far as I know the only way to lose speed with a clutch kit is to install a much stiffer secondary, but the one in the dalton kit will work fine, just follow the instructions in the kit, very simple and easy to follow.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top