Teryx HQ banner

Dynatek CDI Install

7K views 3 replies 4 participants last post by  Jaybo700R 
#1 ·
Super easy, takes less than 10 minutes. Got the CDI from Hunterworks along with the carb/tuning kit. INstalled the TPI valves in the airbox lid. So far so good. Can definitely tune with the TPI valves. Still need some jet fine tuning but wait for the Muzzy's.

I drew an X on the stock ignition module.


Here are the two harnesses disconnected from the stock box and ready to hook to the Dynatek CDI Box.


Here is the completed install. Not enough time to finish my coffee.
 

Attachments

See less See more
6
#2 ·
CDI from Dyna tech gone bad

I recieved my Muzzy power package two weeks ago, I installed the CDI before jetting and exhaust, the teryx ran great. Then the next day installed the exhaust and it ran fine. The next morning I started the teryx up to move from the garage and it started to back fire, then ultimately it would just die. Has anyone else ran into this issue?:(:(
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top