Teryx HQ banner

1 - 5 of 5 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter #1
A few weeks ago I took my Teryx up to the Cinders (about 7,000 feet) and it ran like crap.
I did not want to rejet every time I went upto the high country, so I just had a Dial-a-Jet kit installed.
This past week I went upto Springerville for the 5th annual ATV outlaw trail jamboree.
Before I went I dialed in my Dial-a-Jet for 7000-9000 foot elevation and hoped for the best.
The first day we went on a 105 mile run..........The dial-a-jet worked perfectly absolutely no loss of power, especially after I opened the TPI valve.
It took me about 20 minutes to adjust the Dial-a-jet 19 of which was undoing the seatbelts and taking off the engine cover. The dial-a-jet its self takes about 10 seconds to adjust.
I would highly recomend Dial-a-jet to those who spend any time at different elevations where rejetting would normally be necessary.;)
 

·
CommanderTalk.com
Joined
·
2,799 Posts
We are planning on use these one our 840 motor, glad to hear about your success with it!
 
1 - 5 of 5 Posts
Top