Teryx HQ banner

1 - 12 of 12 Posts

·
Registered
Joined
·
1,434 Posts
Discussion Starter #1 (Edited)
This is a very nice set of 750 cylinder heads, these are virgin heads, I had tore them down and cleaned them and did light polish work getting ready for a friend and he sold his teryx, I will sell them like they are with the original valves, springs, retainers and seals included for 475.00 shipped or I have new valves, springs, and seals and I will finish seating the valves and assemble them where they are ready to bolt on and go for 575.00 shipped, these are very nice heads.

See pictures in the next post

I also have another set that are just liked these just not torn down and cleaned but they are in good shape, I will post some pictures of them later, I want 425.00 shipped them
 

·
Registered
Joined
·
1,434 Posts
Discussion Starter #3
I have had a couple of questions about the heads, I do have 2 complete sets the one you see in the pictures above and the other set is just like them only not torn down and cleaned or polished , I just removed the rocker caps to look at the rocker arms and cam jornals and they are in great shape and I want 425.00 for them shipped, will post some pictures of them later, you can pm me or call me at
home 318-368-3268
cell 318-243-3130
 

·
Registered
Joined
·
1,434 Posts
Discussion Starter #4
I have 2 very good sets of 750 heads, the set I have pictured just like they are with all parts to go with them for 450.00 shipped, or that set with new valves and valve seals built up and ready to bolt on for 525.00 shipped, these have been in solvent tank very clean with mild clean up on the ports.

Also have a set just like them but have not been broke down or cleaned that I will take 400.00 shipped.

If you have any questions you can pm me or you can call me on my cell at 318-243-3130 or 318-368-3268
 

·
Registered
Joined
·
1,434 Posts
Discussion Starter #6
Will post an updated list of what I have but I just pick up 2 very good set of 750 cylinders and another very nice complete pair of heads, all very low milage parts, I will also try to post pic in the next couple of days, also working on some more 38 mm bored throttle bodies.
 

·
Registered
Joined
·
1,434 Posts
Discussion Starter #7
Sold one pair of heads and one pair of cylinders, but I now have 3 sets of heads and 1 pair of cylinders, 1 set of cams, these are all very nice clean and low mileage, set of new stock steel wheels, I am going to try to spend some time this week end laying some of my stuff out and with some pics and prices.
 

·
Registered
Joined
·
1,434 Posts
Discussion Starter #8
As of right now I have 1 set of 750 heads complete in very good shape, as far as cylinders I only have 2 front cylinders, and 1 set of front and rear cams, but I do have another set of heads, cylinders and cams I should have sometime next week, if you are interested you can pm me or call me on my cell 318-243-3130 and I can send you pics of anything you want.
 

·
Registered
Joined
·
1,434 Posts
Discussion Starter #10 (Edited)
The only thing I have right now in my hand is a front cylinder but it will not work for a stock set up the nicacil has a blemish in it and it would work fine for big bore or as a core for big bore, It is listed on ebay right now, I think it has 3 days left but I am pretty sure it will sell, but I will have a great set by the end of the week a match pair, that is like off of a 2009 with very low miles, I have not put my hands on them but according to my friend these should be excellent cylinders, I don't think they will hang around very long, I can give you a shout when I get them in my hands.


If you or anyone is interested in the one on ebay let me know and I will work it where you can get it, but I do have the set of cream puffs coming, I think these will be almost new, like a set that I have for myself, they come off of a brute that was bought and went straight to a mud hog session, and with 17 mile on it the crankcase was filled up with water and they put a new crate engine from Kawi and I got the cylinders and heads and they were absolutly brand new you could not even see any piston markings on the cylinders and I got both cylinders, heads and cams for 150.00, those are my spares so that I can push my 840 to the max, when I got them I alomst felt like I was stealing, I don't think these will be that new but they are suppose to be nice, I will post the pics when I get them.
 
1 - 12 of 12 Posts
Top