Teryx HQ banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
All,
So I have a 2013 Teryx 4 LE. So the machine has about 400 miles on it and is out of the warranty. So here is my dilemma, when I start driving the machine it works as advertised. After about 10-15 min. of driving the machine starts cutting out...like its overheating...like it puts itself into limp mode. There is no overheat light or anything....So I have replaced the temp sensor and I have also removed the thermostat...but the problem is still there...the radiator is clean and I know the water pump works cause i ran it with the radiator cap off to make sure the thermostat was working(this was in my garage...not on the trail). So please help me....im stuck don't know what else to do and I would rather not take it to the dealer if anyone on here has had this problem...again I don't know what else to do...thanks for any help.
 
1 - 1 of 1 Posts
Top