Rear Driveshaft intallation?

1993 Views 1 Reply 2 Participants Last post by Hunterworks, Nov 22, 2011

dieselboy

Discussion Starter · Nov 21, 2011

:banging:Hello all,
I am having a ton of trouble trying to get my rear driveshaft hooked up. Its attached to the rear end and i dont have enough play in it to get it to attach to the output shaft on the motor. Do I have to pull the motor up a few inches to get this on? Any help would be appreciated. :banging:

Save

1 - 2 of 2 Posts

Hunterworks

· #2 · Nov 22, 2011

dieselboy said:
:banging:Hello all,
I am having a ton of trouble trying to get my rear driveshaft hooked up. Its attached to the rear end and i dont have enough play in it to get it to attach to the output shaft on the motor. Do I have to pull the motor up a few inches to get this on? Any help would be appreciated. :banging:

I had to, just undo the exhaust from heads, pull front bolt out and tilt up.

Save

1 - 2 of 2 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month